- Movement
- Manual winding tourbillon
- Size
- 40.10 × 48.15 × 13.08 mm
Overview
Satin-finished grade 5 titanium around the RM17-02 tourbillon
An RM 17-02 Tourbillon in satin-finished grade 5 titanium on a black textile strap, with a black crown and a silver-toned cap. Under the sapphire dial, bridges in blue PVD and gold frame the tourbillon at 6 o’clock, read against large Arabic numerals.
Presented in 2024, the titanium RM 17-02 houses the calibre RM17-02 under a sapphire dial. The baseplate is grade 5 titanium with a black PVD treatment, and the same finishes show through the case back. The calibre is a manual winding tourbillon that runs for around 70 hours. A scale at 2 o’clock shows the power reserve. At 4 o’clock, in the manner of a car’s gearbox, a function indicator shows winding, neutral or hand-setting as the crown is pulled out.
Key details
Design and engineering
- Sapphire dialA 0.30 mm sapphire dial with anti-glare treatment on both sides, protected by eight silicon braces.
- Satin-finished titanium caseThe three-part tonneau and its visible spline screws are set off by the texture of satin-finished grade 5 titanium. The case was the subject of an entire year of research and development.
- Dynamometric crownProtects the winding stem and prevents excessive pressure from damaging the barrel.
- Function indicatorA hand at 4 o’clock shows winding, neutral or hand-setting as the crown is pulled out.
- Power-reserve indicatorA scale at 2 o’clock.
- Movement on rubber mountsNo casing ring is used: the movement is mounted on chassis mounting rubbers (ISO SW) fixed by grade 5 titanium screws.
- Fast-rotating barrelOne revolution every six hours instead of seven and a half.
- Ceramic endstoneFitted to the tourbillon cage.
The reference
Technical specifications
| Reference | RM 17-02 |
|---|---|
| Calibre | RM17-02 |
| Movement | Manual winding tourbillon |
| Functions | Hours, minutes · Power-reserve indicator · Function indicator |
| Power reserve | Around 70 hours (± 10%) |
| Baseplate and bridges | Grade 5 titanium |
| Movement dimensions | 31.20 × 29.45 mm, thickness 4.65 mm |
| Tourbillon diameter | 12.30 mm |
| Jewels | 23, set in white gold chatons |
| Balance | Glucydur®, 2 arms, 4 setting screws, moment of inertia 10 mg·cm², angle of lift 53° |
| Balance spring | Elinvar by Nivarox® |
| Shock protection | KIF Elastor KE 160 B28 |
| Frequency | 21,600 vph (3 Hz) |
| Bridges | Blue PVD and 5N gold |
| Case dimensions | 40.10 × 48.15 × 13.08 mm |
| Case material | Grade 5 titanium, satin-finished |
| Case construction | Tripartite, 12 grade 5 titanium spline screws, 316L stainless steel washers, 2 Nitrile O-ring seals |
| Crystal | Sapphire, anti-glare treatment on both sides, 1.50 mm |
| Interior flange | Grade 5 titanium, black galvanic treatment |
| Water resistance | 50 m |
| Strap | Black textile |
| Introduced | 2024 |
Buying with HYPA
Purchase with confidence
- Warranty card status disclosed for every piece we sell
- Free insured delivery within Australia · international quoted
- Payment by bank transfer
- Registered Australian dealerHYPA International Pty Ltd · Registered Victorian second-hand dealer, Registration No. SHD-0018017.
- Direct specialist supportSpeak with the HYPA team before, during and after the purchase.
- Rated 5.0 on Google · 11 reviewsFrom clients of HYPA International on Google. Read the reviews
Before you buy
Buying guides
Continue browsing
