Richard Mille RM 61-01 Yohan Blake All Black
Size
50.23 × 42.70 × 15.84 mm

Overview

The monochrome black treatment

The RM 61-01 Yohan Blake All Black was shown in 2015, replacing the green and yellow of the launch colourway with black across the flange, bridges and hands. Construction is unchanged: bezel and caseback in TZP-N black ceramic with a matte finish, caseband in NTPT® carbon, and the manual winding calibre RMUL2.

The watch is fitted with a white rubber strap. The large drawn-out crown protectors are visible at 3 o’clock; Richard Mille’s stated purpose for them is to keep the crown from rubbing against the wrist at sprinting speed.

Key details

TreatmentBlack flange, bridges and hands
Bezel and casebackTZP-N black ceramic, matte finish
MovementCalibre RMUL2, manual winding, skeletonised

Design and engineering

  • Calibre RMUL2Manual winding skeletonised movement with a power reserve of 55 hours, built on a grade 5 titanium baseplate and bridges treated with PVD and Titalyt®. The movement is 3.15 mm thick, runs on 24 jewels at 28,800 vph (4 Hz), and weighs 4.3 grams.
  • TZP-N ceramicA black ceramic composed of 95% zirconium compound stabilised with yttrium, with a density of 6 g/cm³. Richard Mille specifies it for scratch resistance and a low coefficient of thermal conductivity, finished matte on top with hand-polished bevelled angles at the sides.
  • NTPT® carbon casebandMultiple layers of parallel filaments obtained by dividing carbon fibre, consolidated under pressure and machined so that the layer structure is exposed.
  • Crown and crown protectorsThe crown is NTPT carbon with an Alcryn collar and a torque-limiting system, flanked by two large protectors that shield it during activity.
  • Asymmetric caseThe case is drawn out between 2 and 5 o’clock so that the crown does not rub against the wrist, and the left side is lower and thinner than the right.
  • Shock resistanceValidation testing carried out in excess of 5,000 g.

Specifications

Technical specifications

RM 61-01 Yohan Blake All Black · Technical datasheet
ReferenceRM 61-01
CalibreRMUL2, manual winding, skeletonised
FunctionsHours, minutes, seconds
Power reserve55 hours
Frequency28,800 vph (4 Hz)
Jewels24
Movement thickness3.15 mm
Movement weight4.3 g
Baseplate and bridgesGrade 5 titanium, PVD and Titalyt® treated
BalanceFree-sprung, variable inertia
BarrelDouble barrel
Shock resistanceValidated in excess of 5,000 g
Case dimensions50.23 × 42.70 × 15.84 mm
CrystalSapphire, anti-glare both sides
Water resistance50 m
Bezel and casebackTZP-N black ceramic, matte finish
CasebandNTPT® carbon
CrownNTPT carbon, Alcryn collar, torque-limiting
StrapWhite rubber, titanium double folding clasp
Introduced2015

Buying with HYPA

Purchase with confidence

  • Manufacturer warranty confirmed from the warranty card
  • Insured worldwide delivery
  • Payment by bank transfer or cryptocurrency
  • Registered Australian dealerHYPA International Pty Ltd · Victorian Second-Hand Dealer Licence SHD-0018017.
  • Direct specialist supportSpeak with the HYPA team before, during and after the purchase.

Enquire about this watch

RM 61-01 Yohan Blake All Black · Ref. RM 61-01 Yohan Blake All Black

Price on enquiry

Preferred contact — optional