Richard Mille RM 60-01 St Barth Ti
Size
50.00 × 16.33 mm

Overview

A titanium case with orange and yellow markings

This Les Voiles de St Barth execution keeps the case in grade 5 titanium throughout. It has a dark bezel with white cardinal letters, orange and yellow scale markings and hands, a light blue crown, and a white rubber strap.

The functional set is that of the RM 60-01 Regatta: the automatic calibre RMAC2 with flyback chronograph, annual calendar with oversize date, running seconds, countdown timer, 24-hour totaliser and UTC, together with the rotating bezel that allows a bearing to be taken from local time and the position of the sun.

Key details

CaseGrade 5 titanium
MovementCalibre RMAC2, automatic winding
BezelRotating, cardinal points with 360° and 24-hour scales

Design and engineering

  • Calibre RMAC2An automatic winding movement with hours, minutes, running seconds at 3 o’clock, oversize date, month, annual calendar, flyback chronograph with central seconds counter, countdown timer at 9 o’clock, 24-hour totaliser at 6 o’clock, UTC function and adjustable rotor geometry. The movement is 39.15 mm in diameter and 9.00 mm thick, on 62 jewels at 28,800 vph (4 Hz).
  • Titanium caseFour parts in grade 5 titanium, assembled with 46 grade 5 titanium spline screws and 316L stainless steel washers.
  • Rotating bezel with compass functionThe bezel carries north, south, east and west alongside a 360° graduation and a 24-hour disc. The UTC indicator is aimed at the sun using the pusher at 9 o’clock, then the bezel is turned until the UTC hand aligns with the local time engraved on it, at which point the compass headings correspond to actual directions — in either hemisphere, without further calculation.
  • Chronograph pusher lockThe flyback pushers are locked and released by a quick turn of the secondary crown, marked with red and green arrows, which prevents accidental operation.
  • Free-sprung balance with variable inertiaThe regulator index is replaced by four small adjustable weights on a Glucydur balance with four arms, a moment of inertia of 4.8 mg·cm² and an angle of lift of 53°.
  • Case sealingTwo nitrile O-ring seals give a water resistance of 100 m.

Specifications

Technical specifications

RM 60-01 Les Voiles de St Barth, Titanium · Technical datasheet
ReferenceRM 60-01
CalibreRMAC2, automatic winding
FunctionsHours, minutes, running seconds at 3 o’clock, oversize date, month, annual calendar, flyback chronograph, countdown timer at 9 o’clock, 24-hour totaliser at 6 o’clock, UTC
Power reserveCirca 55 hours (± 10%) without chronograph running
Frequency28,800 vph (4 Hz)
Jewels62
Movement diameter39.15 mm
Movement thickness9.00 mm
Baseplate, bridges, balance cockGrade 5 titanium, black PVD
BalanceGlucydur, 4 arms, inertia 4.8 mg·cm², lift angle 53°
BarrelDouble barrel
RotorAdjustable geometry
Case dimensions50.00 × 16.33 mm
BezelRotating, cardinal points, 360° graduation, 24-hour scale
Case assembly46 grade 5 titanium spline screws, 316L washers
CrystalSapphire, anti-glare both sides
Water resistance100 m, two nitrile O-ring seals
Case materialGrade 5 titanium, four parts
StrapWhite rubber

Buying with HYPA

Purchase with confidence

  • Manufacturer warranty confirmed from the warranty card
  • Insured worldwide delivery
  • Payment by bank transfer or cryptocurrency
  • Registered Australian dealerHYPA International Pty Ltd · Victorian Second-Hand Dealer Licence SHD-0018017.
  • Direct specialist supportSpeak with the HYPA team before, during and after the purchase.

Enquire about this watch

RM 60-01 Les Voiles de St Barth, Titanium · Ref. RM 60-01 St Barth Ti

Price on enquiry

Preferred contact — optional