- Size
- 49.94 × 44.50 × 16.15 mm
- Edition
- 33 pieces
Overview
Black ceramic and titanium, 33 pieces
The Last Black Edition pairs black TZP ceramic with titanium in the reference’s 50 mm tonneau case, on a black rubber strap. It was made in a limited edition of 33 pieces.
An inner ivory ring frames the skeletonised movement, carrying the tachymeter and minute track in a warm off-white against the black case and the dark spline screws set into it. The crown and the surrounds of the pushers are left in bare metal. Its counterpart, the Last White Edition, uses the same ivory ring against a white ceramic case.
Key details
Edition33 pieces
CaseBlack TZP ceramic with titanium
MovementCalibre RMAC3, automatic flyback chronograph
Design and engineering
- Calibre RMAC3Skeletonised automatic winding movement with hours, minutes, seconds, flyback chronograph, 60-minute countdown timer at 9 o’clock, 12-hour totaliser, oversize date, month indicator and variable-geometry rotor. 68 jewels, 28,800 vph (4 Hz).
- Double barrelTwo barrels mounted side by side for stable coupling, providing circa 55 hours (± 10%) of power reserve.
- Baseplate and bridgesGrade 5 titanium, with a satin-brushed upper bridge contrasting against the PVD-coated movement beneath and a PVD-treated lower bridge framing the double barrel at the back.
- Variable-geometry rotorGrade 5 titanium on ceramic ball bearings, its inertia set across six positions by two 18K white gold wings, matching winding to the wearer’s activity level.
- Free-sprung balance with variable inertiaGlucydur®, four arms, moment of inertia 4.8 mg·cm², angle of lift 53°, with an AK3 balance spring and Incabloc 908.22.211.100 shock protection.
- Annual calendarAutomatic adjustment for months of 30 and 31 days, with the oversize date below 12 o’clock and the month between 4 and 5 o’clock.
- Ivory inner ringFrames the skeletonised movement and carries the tachymeter scale and minute track in a warm off-white, shared with the Last White Edition.
- Black TZP ceramicTetragonal zirconia polycrystal, sintered from zirconium oxide powder under heat and pressure, which Richard Mille specifies for hardness, scratch resistance and colour stability, and works with diamond tooling.
Specifications
Technical specifications
| Reference | RM 11-03 (RM11-03 Ti TZP) |
|---|---|
| Calibre | RMAC3 |
| Type | Skeletonised automatic winding |
| Functions | Hours, minutes, seconds, flyback chronograph, 60-minute countdown timer at 9 o’clock, 12-hour totaliser, oversize date, month indicator, variable-geometry rotor |
| Calendar | Annual |
| Power reserve | Circa 55 hours (± 10%) |
| Frequency | 28,800 vph (4 Hz) |
| Jewels | 68 |
| Movement dimensions | 30.25 × 28.45 mm |
| Movement thickness | 9.00 mm |
| Baseplate and bridges | Grade 5 titanium, PVD |
| Balance | Glucydur®, 4 arms, inertia 4.8 mg·cm², lift angle 53° |
| Barrels | Two, mounted side by side |
| Rotor | Variable geometry, grade 5 titanium, 18K white gold wings, six positions |
| Case dimensions | 49.94 × 44.50 × 16.15 mm |
| Case material | Black TZP ceramic with titanium |
| Inner ring | Ivory |
| Crown and pushers | Bare metal; pushers capped in NTPT carbon |
| Case assembly | 20 grade 5 titanium spline screws |
| Crystal | Sapphire, anti-reflective coated; sapphire caseback |
| Water resistance | 50 m — not stated by Richard Mille |
| Strap | Black rubber |
| Edition | 33 pieces |
Buying with HYPA
Purchase with confidence
- Manufacturer warranty confirmed from the warranty card
- Insured worldwide delivery
- Payment by bank transfer or cryptocurrency
- Registered Australian dealerHYPA International Pty Ltd · Victorian Second-Hand Dealer Licence SHD-0018017.
- Direct specialist supportSpeak with the HYPA team before, during and after the purchase.
Continue browsing
