Richard Mille RM 11-03 Last White
Size
49.94 × 44.50 × 16.15 mm
Edition
30 pieces

Overview

White ceramic, 30 pieces

The Last White Edition is cased in white ceramic — bezel and caseband alike in a matte white, with dark spline screws set against it — over the same ivory inner ring and skeletonised movement as the Last Black Edition. The crown is white, the pusher guards white with dark lettering, and the strap white rubber. It was made in a limited edition of 30 pieces.

The white ceramic is ATZ, an aluminium-oxide ceramic Richard Mille rates at 1,400 Vickers and describes as having an unchangeable colour, formed from powder injected at close to 2,000 bar and finished with diamond tooling.

Key details

CaseWhite ATZ ceramic
Edition30 pieces
MovementCalibre RMAC3, automatic flyback chronograph

Design and engineering

  • Calibre RMAC3Skeletonised automatic winding movement with hours, minutes, seconds, flyback chronograph, 60-minute countdown timer at 9 o’clock, 12-hour totaliser, oversize date, month indicator and variable-geometry rotor. 68 jewels, 28,800 vph (4 Hz).
  • Double barrelTwo barrels side by side, circa 55 hours (± 10%) of power reserve.
  • White ATZ ceramic caseAluminium-oxide ceramic, produced from powder injected at nearly 2,000 bar, which Richard Mille states raises rigidity by 20 to 30% and minimises porosity. Curved profiles and satin finishes are produced by extended machining with diamond tools.
  • Baseplate and bridgesGrade 5 titanium, with the satin-brushed upper bridge and PVD-treated lower bridge of the reference.
  • Variable-geometry rotorGrade 5 titanium on ceramic ball bearings, six positions, 18K white gold wings.
  • Free-sprung balance with variable inertiaGlucydur®, four arms, moment of inertia 4.8 mg·cm², angle of lift 53°.
  • Annual calendarOversize date below 12 o’clock, month between 4 and 5 o’clock, adjusting automatically for months of 30 and 31 days.

Specifications

Technical specifications

RM 11-03 Last White Edition · Technical datasheet
ReferenceRM 11-03
CalibreRMAC3
TypeSkeletonised automatic winding
FunctionsHours, minutes, seconds, flyback chronograph, 60-minute countdown timer at 9 o’clock, 12-hour totaliser, oversize date, month indicator, variable-geometry rotor
CalendarAnnual
Power reserveCirca 55 hours (± 10%)
Frequency28,800 vph (4 Hz)
Jewels68
Movement dimensions30.25 × 28.45 mm
Movement thickness9.00 mm
Baseplate and bridgesGrade 5 titanium, PVD
BalanceGlucydur®, 4 arms, inertia 4.8 mg·cm², lift angle 53°
BarrelsTwo, mounted side by side
RotorVariable geometry, grade 5 titanium, 18K white gold wings, six positions
Case dimensions49.94 × 44.50 × 16.15 mm
Case materialWhite ATZ ceramic, 1,400 Vickers
Inner ringIvory
DialSkeletonised
Case assembly20 grade 5 titanium spline screws
CrystalSapphire, anti-reflective coated; sapphire caseback
Water resistance50 m — not stated by Richard Mille
StrapWhite rubber
Edition30 pieces

Buying with HYPA

Purchase with confidence

  • Manufacturer warranty confirmed from the warranty card
  • Insured worldwide delivery
  • Payment by bank transfer or cryptocurrency
  • Registered Australian dealerHYPA International Pty Ltd · Victorian Second-Hand Dealer Licence SHD-0018017.
  • Direct specialist supportSpeak with the HYPA team before, during and after the purchase.

Enquire about this watch

RM 11-03 Last White Edition · Ref. RM 11-03 Last White

Price on enquiry

Preferred contact — optional