- Case
- Tripartite tonneau
- Movement
- Automatic winding, skeletonised
- Size
- 52.63 × 34.40 × 13.00 mm
Overview
Stones set directly into Carbon TPT®, in vertical rows
Setting stones into Carbon TPT® requires the seats to be machined into the composite rather than cut by hand, since the material cannot be worked with conventional setting tools. Here the technique is applied across the bezel and caseband in vertical rows, divided by red gold rails.
The dial-centre plate is set to match, framing a dark carbon panel, with red gold on the crown, the pushers and the inner bezel, and a black rubber strap.
Key details
Case materialCarbon TPT®, row set
MovementCalibre CRMA1, skeletonised automatic winding
Water resistance50 m
Design and engineering
- Setting in Carbon TPT®The seats are machined into the composite, which allows stones to be set without the metal collars a hand-cut seat would need.
- Row settingStones run in vertical rows across the bezel and down the caseband flanks, separated by red gold rails.
- Set dial-centre plateThe centre frame is set to match the case, around a dark carbon panel.
- Oversize dateSemi-instantaneous, placed horizontally under 12 o’clock and driven by two skeletonised calendar discs over a white field.
- Function selectorA push-button at 4 o’clock selects winding, neutral and hand-setting with a single push, in the manner of a gearbox; an aperture alongside shows W, N or H. A second push-button at 10 o’clock corrects the date.
- Variable-geometry rotorHeavy external outside edge and edge ring in ARCAP, weight segment in heavy metal, ceramic ball bearings and a OneWay® winding system, allowing the winding rate to be set to the wearer’s activity level.
Specifications
Technical specifications
| Reference | RM 037 |
|---|---|
| Calibre | CRMA1, in-house |
| Movement | Automatic winding, skeletonised |
| Functions | Hours, minutes, oversize date, function selector, variable-geometry rotor |
| Power reserve | Around 50 hours (± 10%) |
| Movement dimensions | 28.00 × 22.90 mm, thickness 5.79 mm |
| Jewels | 25 |
| Balance | CuBe, 4 arms, 4 setting screws, moment of inertia 7.5 mg·cm², angle of lift 50° |
| Frequency | 28,800 vph (4 Hz) |
| Balance spring | AK3 |
| Shock protection | Incabloc 908.22.211.100 (transparent) |
| Escapement wheel jewels | Rubifix (transparent) |
| Baseplate and bridges | Microblasted grade 5 titanium, electroplasma treated |
| Barrel | Fast rotating, 1 revolution in 5 hours |
| Rotor | Variable geometry; ARCAP outside edge and edge ring, heavy metal weight segment, ceramic ball bearings, OneWay® winding system |
| Case | Tripartite tonneau |
| Case dimensions | 52.63 × 34.40 × 13.00 mm |
| Case materials | Carbon TPT® with red gold |
| Setting | Vertical rows on the bezel and caseband; set dial-centre plate |
| Dial centre | Dark carbon panel in a set frame |
| Case assembly | 20 grade 5 titanium spline screws, 316L stainless steel washers, 2 Nitrile O-ring seals |
| Water resistance | 50 m |
| Strap | Black rubber |
Buying with HYPA
Purchase with confidence
- Manufacturer warranty confirmed from the warranty card
- Insured worldwide delivery
- Payment by bank transfer or cryptocurrency
- Registered Australian dealerHYPA International Pty Ltd · Victorian Second-Hand Dealer Licence SHD-0018017.
- Direct specialist supportSpeak with the HYPA team before, during and after the purchase.
Continue browsing
