- Size
- 38.70 × 47.52 × 7.80 mm
Overview
French flag colours on a White Quartz TPT® case
The RM 67-02 Alexis Pinturault was made for the French alpine skier and introduced in 2018, in the second wave of RM 67-02 executions. Richard Mille’s own description of it is precise: bezel and caseback in Quartz TPT®, caseband in Carbon TPT®, and bridges hand-painted in the colours of the French flag.
The photograph matches — a white case with red and blue markings across the dial, a red crown and a blue strap. The dial itself is a sheet of titanium four tenths of a millimetre thick, black DLC-treated and then painted by hand.
Key details
CaseQuartz TPT® bezel and caseback, Carbon TPT® caseband
BridgesHand-painted in the colours of the French flag
MovementCalibre CRMA7, automatic
Design and engineering
- Calibre CRMA7Skeletonised automatic winding movement with hours and minutes, on 25 jewels at 28,800 vph (4 Hz), with around 50 hours (± 10%) of power reserve. Richard Mille cites work on the gear-tooth profile and a faster-rotating barrel among the changes made to raise the calibre’s efficiency.
- Baseplate and bridgesGrade 5 titanium. The baseplate carries a black DLC treatment, which Richard Mille specifies for rigidity and for the surface flatness the gear train requires; the bridges carry a grey DLC treatment and are satin-finished, microblasted and bevelled by hand.
- Titanium dialMachined from a 0.40 mm titanium sheet, black DLC-coated, then hand-painted in blue, white and red.
- RotorCarbon TPT® and white gold, on the OneWay® winding system with ceramic ball bearings, which allows the barrel to be wound efficiently in an extra-flat calibre.
- Quartz TPT® and Carbon TPT®Quartz TPT® is produced from silica threads divided into layers no thicker than 45 microns; Carbon TPT® from filaments divided out of carbon fibre, in layers a maximum of 30 microns thick. Both are saturated in resins developed for Richard Mille, stacked with the fibre orientation rotated by 45° between plies, cured at 120°C under 6 bar and CNC-machined at the brand’s own facilities. Silica takes colour in a way carbon does not, which is why the coloured executions in this series are Quartz rather than Carbon.
- Case assemblyWater-resistant to 30 m via two nitrile O-ring seals, assembled with 12 grade 5 titanium spline screws and 316L stainless steel washers.
- Comfort strapEntirely seamless, non-slip and highly elastic, developed so that the watch follows the contours of the individual wrist. The complete watch weighs 32 grams with the strap.
Specifications
Technical specifications
| Reference | RM 67-02 |
|---|---|
| Calibre | CRMA7, automatic winding, skeletonised |
| Functions | Hours, minutes |
| Power reserve | Around 50 hours (± 10%) |
| Frequency | 28,800 vph (4 Hz) |
| Jewels | 25 |
| Baseplate | Grade 5 titanium, black DLC |
| Bridges | Grade 5 titanium, grey DLC |
| Rotor | Carbon TPT® and white gold, OneWay® with ceramic ball bearings |
| Case dimensions | 38.70 × 47.52 × 7.80 mm |
| Case assembly | 12 grade 5 titanium spline screws, 316L washers |
| Weight | 32 g including strap |
| Crystal | Sapphire |
| Water resistance | 30 m, two nitrile O-ring seals |
| Dial | Titanium, 0.40 mm, black DLC, hand-painted French flag colours |
| Bezel and caseback | Quartz TPT® |
| Caseband | Carbon TPT® |
| Crown | Red |
| Strap | Blue textile comfort strap |
| Introduced | 2018 |
Buying with HYPA
Purchase with confidence
- Manufacturer warranty confirmed from the warranty card
- Insured worldwide delivery
- Payment by bank transfer or cryptocurrency
- Registered Australian dealerHYPA International Pty Ltd · Victorian Second-Hand Dealer Licence SHD-0018017.
- Direct specialist supportSpeak with the HYPA team before, during and after the purchase.
Continue browsing
