- Size
- 38.70 × 47.52 × 7.75 mm
Overview
Red gold with banded diamond setting
This execution sets round diamonds in bands across the upper and lower bezel and along the case sides, leaving the red gold visible as framing between the bands and around the case screws. The numerals are white, the hands gold, the strap black rubber.
The suffix MED is not a Richard Mille designation found in any source. Read as an abbreviation of medium, it describes the same coverage as the mid setting on card 457, and the two photographs are the same watch to the extent that the date reads 08 in both. Whether these are two records for one execution is a question for the feed rather than the grid.
Key details
CaseRed gold with banded diamond setting
MovementCalibre CRMA6, 3.60 mm thick
SuffixMED, not documented by Richard Mille
Design and engineering
- Calibre CRMA6Skeletonised automatic winding movement with hours, minutes, date and function indicator. It measures 29.10 × 31.25 mm with a thickness of 3.60 mm, runs on 25 jewels at 28,800 vph (4 Hz) and provides around 50 hours (± 10%) of power reserve.
- Banded settingRound stones are set in bands across the upper and lower bezel and along the case sides, with the metal left visible as framing between the bands and around the case screws.
- Baseplate and bridgesGrade 5 titanium. The baseplate is microblasted with a grey electroplasma treatment; the bridges are microblasted and black electroplasma treated, which Richard Mille records as a first for the brand.
- Platinum rotorA platinum rotor on the OneWay® winding system with ceramic ball bearings, which allows the barrel to be wound efficiently while keeping the movement’s compact dimensions.
- Fast-rotating barrelOne revolution every five hours instead of seven and a half, which Richard Mille specifies for reduced periodic internal mainspring adhesion and a favourable mainspring delta curve.
- Free-sprung balance with variable inertiaCuBe, four arms and four setting screws, a moment of inertia of 7.5 mg·cm² and an angle of lift of 50°, with an AK3 balance spring and Incabloc 908.22.211.100 shock protection. The regulator index is eliminated in favour of four adjustable weights on the balance.
Specifications
Technical specifications
| Reference | RM 67-01 |
|---|---|
| Calibre | CRMA6, automatic winding, skeletonised |
| Functions | Hours, minutes, semi-instantaneous date at 5 o’clock, function indicator at 2 o’clock |
| Power reserve | Around 50 hours (± 10%) |
| Frequency | 28,800 vph (4 Hz) |
| Jewels | 25 |
| Movement dimensions | 29.10 × 31.25 mm |
| Movement thickness | 3.60 mm |
| Baseplate | Grade 5 titanium, microblasted, grey electroplasma |
| Bridges | Grade 5 titanium, microblasted, black electroplasma |
| Rotor | Platinum, OneWay® with ceramic ball bearings |
| Balance | CuBe, 4 arms, 4 setting screws, inertia 7.5 mg·cm², lift angle 50° |
| Balance spring | AK3 |
| Shock protection | Incabloc 908.22.211.100 (transparent) |
| Barrel | Fast rotating, five hours per revolution instead of 7.5 |
| Going train | 20° pressure angle |
| Date | Semi-instantaneous, vertical aperture at 5 o’clock |
| Function indicator | Hand at 2 o’clock showing W, D or H |
| Case dimensions | 38.70 × 47.52 × 7.75 mm |
| Numerals | Solid metal on two titanium rails |
| Crystal | Sapphire, both sides |
| Water resistance | 50 m |
| Case material | Red gold |
| Gem-setting | Mid setting, round diamonds, bezel and case sides |
| Strap | Black rubber |
Buying with HYPA
Purchase with confidence
- Manufacturer warranty confirmed from the warranty card
- Insured worldwide delivery
- Payment by bank transfer or cryptocurrency
- Registered Australian dealerHYPA International Pty Ltd · Victorian Second-Hand Dealer Licence SHD-0018017.
- Direct specialist supportSpeak with the HYPA team before, during and after the purchase.
Continue browsing
