- Case
- Carbon TPT® with red gold; baguette diamonds on the bezel
- Movement
- Automatic, calibre CRMA2, skeletonised
Overview
Carbon TPT® and red gold with baguette diamonds
An RM 07-01 in Carbon TPT® with red gold, the bezel set with baguette diamonds, on a black strap. At the centre, a red gold frame holds a panel of diamonds on a Carbon TPT® plate.
Carbon TPT® gives a damascene pattern and a moiré sheen. It is built from layers no thicker than 30 microns, each of parallel carbon filaments impregnated with matrix, with the direction turned 45° between layers, then heated to 120 °C at 6 bars and machined.
Key details
Case materialCarbon TPT® with red gold
SettingBaguette diamonds on the bezel
Dial centreDiamond panel in red gold on Carbon TPT®
Design and engineering
- Baguette settingDouble rows of baguette-cut diamonds at the top and bottom of the bezel, single columns down the sides.
- Calibre CRMA2Skeletonised automatic movement with hours, minutes and adjustable rotor geometry, on a baseplate and bridges in microblasted grade 5 titanium with electroplasma treatment.
- Variable-geometry rotorBidirectional, with a heavy outer edge and edge ring in 5N red gold and OneWay® ceramic ball bearings. Two weights, fixed by spline screws, set the rotor to the owner’s activity level.
- Free-sprung balance with variable inertiaThe regulator index is eliminated; four small adjustable weights sit directly on the balance.
- Fast-rotating barrelOne revolution every five hours instead of seven and a half.
The reference
Technical specifications
| Reference | RM 07-01 |
|---|---|
| Case | Carbon TPT® with red gold; baguette diamonds on the bezel |
| Movement | Automatic, calibre CRMA2, skeletonised |
| Baseplate and bridges | Microblasted grade 5 titanium, electroplasma treated |
| Movement dimensions | 29.90 × 22.00 mm, thickness 4.92 mm |
| Jewels | 25 |
| Balance | CuBe, 4 arms, 4 setting screws, moment of inertia 7.5 mg·cm², angle of lift 50°; free-sprung, variable inertia |
| Balance spring | AK3 |
| Winding | Bidirectional variable-geometry rotor, 5N red gold edge ring, OneWay® ceramic ball bearings |
| Functions | Hours, minutes · Adjustable rotor geometry |
| Frequency | 28,800 vph (4 Hz) |
| Power reserve | Around 50 hours (± 10%) |
| Dial | Red gold frame with diamond panel, Carbon TPT® plate |
| Strap | Black |
Buying with HYPA
Purchase with confidence
- Warranty card status disclosed for every piece we sell
- Free insured delivery within Australia · international quoted
- Payment by bank transfer
- Registered Australian dealerHYPA International Pty Ltd · Registered Victorian second-hand dealer, Registration No. SHD-0018017.
- Direct specialist supportSpeak with the HYPA team before, during and after the purchase.
- Rated 5.0 on Google · 11 reviewsFrom clients of HYPA International on Google. Read the reviews
Before you buy
Buying guides
Continue browsing
