- Movement
- Manual winding
- Size
- 44 mm
Overview
One pusher, a split hand and a large date
The F.P. Journe Chronographe Rattrapante, reference CM, in 18K 6N gold on the 6N gold bracelet, blackened guilloché silver dial with matte 5N gold numerals and whitened guilloché silver counters. 44 mm and 12.1 mm high; manually wound calibre 1518 in 18K rose gold, a single-pusher split-seconds chronograph with a very large date.
The Chronographe Rattrapante of the lineSport collection is a hand-wound split-seconds chronograph with a single chronograph pusher and a very large date, in a 44 mm case 12.1 mm high with a tachymetric bezel inlaid with ceramic. The movement is in 18K rose gold, on a bracelet in the case metal. The brand says the movement was inspired by the chronograph it made for Only Watch 2017, and that the ceramic bezel and the new numeral typography recall that piece.
Calibre 1518 engages its chronograph through direct gearing with a rocking pinion, which the brand says avoids the jump of the hand at the start. One pusher at 2 o'clock starts, stops and returns the chronograph to zero; the pusher at 4 o'clock is the rattrapante, the split-seconds. Both pushers are in the case metal. The very large date, in a window of 5.20 × 2.80 mm for legibility, is corrected from the crown in position 2, with winding in position 1 and time setting in position 3. The development the brand singles out was holding all of this, split-seconds and date, within a movement 6.80 mm high, a height it treats as its signature. The reserve is 80 hours without the chronograph running, which the brand says leaves the split-seconds usable after two days. The balance is free-sprung on four inertia weights with an Anachron spring on a Nivatronic collet, at 21,600 vibrations an hour.
For collectors
The pusher layout is the tell. A two-pusher chronograph carries one either side of the crown; here the 2 o'clock pusher does all three chronograph functions and the 4 o'clock pusher only splits, so the case reads as a monopusher with a rattrapante.
Key details
Design and engineering
- Single chronograph pusherStart, stop and zero from one pusher at 2 o'clock; the split hand has its own pusher at 4 o'clock. Both are in the case metal.
- Direct gearing, rocking pinionThe chronograph is engaged through a rocking pinion on direct gearing, which, in the brand's account, removes the jump of the hand at the start.
- Very large dateA window of 5.20 × 2.80 mm, for legibility; corrected in crown position 2. Fitting it within a 6.80 mm movement is the development the brand singles out.
- Case and bracelet44 mm and 12.1 mm high, tachymetric bezel inlaid with ceramic. Bracelet in the case metal with a matte hammered finish developed for it, articulated links at the case and a folding clasp adjustable by about 5 mm.
- FinishingCircular stripes on the bridges, circular graining on the base plate, polished screw heads with chamfered slots, pegs with polished rounded ends, straight-grained steel work.
Calibre 1518
- Manual winding, 38 turns of the crown; movement in 18K rose gold
- Monopusher split-seconds chronograph with very large date; chronograph pusher at 2 o'clock, split-seconds pusher at 4
- Free-sprung chronometric balance, four adjustable inertia weights, Anachron spring, Nivatronic collet; in-line lever escapement, 15-tooth escape wheel
- 21,600 vibrations per hour (3 Hz), 29 jewels
- Power reserve 80 ± 2 hours without the chronograph; amplitude 300° dial-up at full wind, 260° after 24 hours
- 33.60 mm overall diameter, 6.80 mm high, 285 parts
The reference
Technical specifications
| Reference | CM |
|---|---|
| Collection | LineSport |
| Calibre | Calibre 1518 |
| Movement | Manual winding |
| Case dimensions | 44 mm |
| Case thickness | 12.1 mm |
| Case material | 18K 6N Gold |
| Dial | blackened guilloché Silver dial, matte 5N Gold appliqué numerals, counters in whitened guilloché Silver |
| Hands | matte 5N gilt Steel, ivory color Steel and blued Steel |
| Bracelet | 18K 6N Gold |
| Jewels | 29 |
| Power reserve | 80 ± 2 hours without the chronograph |
| Movement parts | 285 |
Buying with HYPA
Purchase with confidence
- Warranty card status disclosed for every piece we sell
- Free insured delivery within Australia · international quoted
- Payment by bank transfer
- Registered Australian dealerHYPA International Pty Ltd · Registered Victorian second-hand dealer, Registration No. SHD-0018017.
- Direct specialist supportSpeak with the HYPA team before, during and after the purchase.
- Rated 5.0 on Google · 6 reviewsFrom clients of HYPA International on Google. Read the reviews
Continue browsing
