- Case
- Platinum Flat Tortue® case set with 315 brilliant cut diamonds VVS1 F/G ~ 2.81 carats and 72 rubies ~ 0.71 carat
- Movement
- Quartz
- Size
- 40 × 35 mm
Overview
The watch that stops when it is set down
The F.P. Journe élégante 40 mm in platinum with rubies, reference EL, on the powder red satin strap. The case carries 315 diamonds, about 2.81 carats, and 72 rubies, about 0.71 carat; the dial, 217 rubies inside an hour ring of 163 diamonds. Case 40 × 35 mm, 7.35 mm high.
Jewellery versions of the 40 mm élégante, in platinum only, each built around one coloured stone: black diamonds, rubies, blue sapphires or tsavorites. The case carries 315 brilliant-cut white diamonds with 72 of the coloured stones, the folding clasp is set with diamonds of about 0.95 carat, and the powdered satin strap follows the colour: black, red, blue or green. On the ruby, sapphire and tsavorite executions the dial centre is paved with 217 of the coloured stones inside an hour ring of 163 diamonds; on the black-diamond execution the arrangement is reversed, a white-diamond centre inside a black-diamond hour ring. The hands are blued steel. F.P. Journe gives the production as between 2018 and 2020.
The élégante was F.P. Journe's first ladies' collection and its first electromechanical movement, and the brand says the movement took eight years to develop. In Journe's own account, women had been asking him for a watch of their own for 20 years, one that was different and comfortable to wear; his answer was built around autonomy, 8 to 10 years in daily use and up to 18 in standby. The mechanical parts are made by F.P. Journe and the electronics in Switzerland, around a microprocessor created for the watch.
A mechanical motion detector, an inertia weight visible on the dial at 4:30, tells the processor whether the watch is being worn. After 35 minutes without movement the gears, rotors and hands stop while the processor goes on counting time; when the watch is moved again the hands run to the correct time by the shorter route, forwards or backwards. A patented two-rotor motor drives the hands, with central hours and minutes and a small seconds at 6 o'clock.
For collectors
The timebase is quartz, but the movement is built and finished like F.P. Journe's mechanical calibres: the brand lists a 4N golden movement, Côtes de Genève, polished and bevelled screw heads, pegs with polished rounded ends and an engraved, decorated battery bridge. The figure that defines the watch is its autonomy rather than its frequency, and the standby is what delivers it.
Key details
Design and engineering
- StandbyStopping the gears, rotors and hands is what makes the autonomy possible. With only the processor keeping time, consumption is low enough for up to 18 years in standby, against 8 to 10 in daily use.
- Automatic re-settingWhen the watch is moved again the hands take the shortest path, clockwise or anti-clockwise, to the time the processor has kept, so the display catches up without the wearer resetting it.
- Two-rotor motorPatented, driving the hands through a gear train made by F.P. Journe. The time is set with the crown in its second position, and the seconds stop while it is pulled.
- Flat Tortue caseRegistered Flat Tortue® shape, 40 × 35 mm and 7.35 mm high, with a sapphire crystal case back, a screw-down crown and water resistance to 30 m. Metal, gem-setting and strap vary with the execution.
- DialAn inner dial framed by an outer dial of screwed steel elements. F.P. Journe makes the centre in white or black luminescent material, white or black sapphire, or set with diamonds or with diamonds and precious stones, according to the model.
Calibre 1210
- Electromechanical, quartz at 32,768 Hz
- Patented two-rotor motor, processor created for the watch
- Standby after 35 minutes motionless, automatic restart and time setting
- Autonomy 8 to 10 years in daily use, 18 years in standby
- 18 jewels, 132 parts
- 28.5 × 28.3 mm overall, 3.13 mm high
The reference
Technical specifications
| Reference | EL |
|---|---|
| Collection | Élégante |
| Calibre | Calibre 1210 |
| Movement | Quartz |
| Functions | Central hours and minutes, Small second at 6h00 |
| Case dimensions | 40 × 35 mm |
| Case thickness | 7.35 mm |
| Case material | Platinum |
| Case | Platinum Flat Tortue® case set with 315 brilliant cut diamonds VVS1 F/G ~ 2.81 carats and 72 rubies ~ 0.71 carat |
| Water resistance | 30 m |
| Dial | centre pave set with 217 rubies and 163 brilliant cut diamonds VVS1 F/G hour ring for a total of ~ 0.79 carat, outer with screwed Steel element |
| Hands | blued Steel |
| Strap | Powder red satin strap |
| Jewels | 18 |
| Power reserve | Daily use: 8 to 10 years |
| Frequency | Quartz: 32'768 Hz. |
| Movement parts | 132 |
| Clasp | Platinum folding clasp set with brilliant cut diamonds VVS1 F/G ~ 0.95 carat |
| Status | No longer in the current collection |
Buying with HYPA
Purchase with confidence
- Warranty card status disclosed for every piece we sell
- Free insured delivery within Australia · international quoted
- Payment by bank transfer
- Registered Australian dealerHYPA International Pty Ltd · Registered Victorian second-hand dealer, Registration No. SHD-0018017.
- Direct specialist supportSpeak with the HYPA team before, during and after the purchase.
- Rated 5.0 on Google · 6 reviewsFrom clients of HYPA International on Google. Read the reviews
Before you buy
Buying guides
Continue browsing
