Richard Mille RM 67-02 White Carbon TPT
Size
38.70 × 47.52 × 7.80 mm

Overview

A white case on a record that says Carbon TPT

The photograph shows a white case with blue and red lines across the bridges, a red crown and a white textile strap — the French tricolour on a white case, which is the Alexis Pinturault configuration.

The card labels the material White Carbon TPT. Carbon TPT® is made from divided carbon fibre and is black or grey; the white composite in Richard Mille’s material set is Quartz TPT®, and the brand’s own description of the Pinturault execution specifies a Quartz TPT® bezel and caseback with a Carbon TPT® caseband. Nothing is entered for the material rather than asserting which part is which on a straight-on photograph.

Card 464 is the Alexis Pinturault under its own name, and the two are flagged as probable duplicates.

Key details

Case as photographedWhite composite with blue and red markings
Case materialNot established
MovementCalibre CRMA7, automatic

Design and engineering

  • What is not establishedThe label reads White Carbon TPT and Carbon TPT® is not produced in white. Richard Mille’s description of the matching execution gives a Quartz TPT® bezel and caseback over a Carbon TPT® caseband, but this photograph is straight on and does not show which part is which. Nothing is entered for the material.
  • Calibre CRMA7Skeletonised automatic winding movement with hours and minutes, on 25 jewels at 28,800 vph (4 Hz), with around 50 hours (± 10%) of power reserve.
  • TPT® composite constructionQuartz TPT® is built from silica threads in layers no thicker than 45 microns; Carbon TPT® from divided carbon fibres in layers a maximum of 30 microns thick. Both are oriented 45° apart from ply to ply, cured at 120°C under 6 bar and machined in-house. Silica takes colour in a way carbon does not, which is why the coloured executions in this series are silica-based composites.
  • Titanium dial0.40 mm, black DLC-treated, hand-painted in blue, white and red.
  • Baseplate and bridgesGrade 5 titanium. The baseplate carries a black DLC treatment, which Richard Mille specifies for rigidity and for the surface flatness the gear train requires; the bridges carry a grey DLC treatment and are satin-finished, microblasted and bevelled by hand.
  • RotorCarbon TPT® and white gold, on the OneWay® winding system with ceramic ball bearings, which allows the barrel to be wound efficiently in an extra-flat calibre.
  • Comfort strapEntirely seamless, non-slip and highly elastic; Richard Mille describes it as the lightest strap it has made. The complete watch weighs 32 grams with the strap.

Specifications

Technical specifications

RM 67-02 White Case · Technical datasheet
ReferenceRM 67-02
CalibreCRMA7, automatic winding, skeletonised
FunctionsHours, minutes
Power reserveAround 50 hours (± 10%)
Frequency28,800 vph (4 Hz)
Jewels25
BaseplateGrade 5 titanium, black DLC
BridgesGrade 5 titanium, grey DLC
RotorCarbon TPT® and white gold, OneWay® with ceramic ball bearings
DialTitanium, 0.40 mm, black DLC, hand-painted
Case dimensions38.70 × 47.52 × 7.80 mm
Case assembly12 grade 5 titanium spline screws, 316L washers
Weight32 g including strap
CrystalSapphire
Water resistance30 m, two nitrile O-ring seals
CrownRed
StrapWhite textile comfort strap

Buying with HYPA

Purchase with confidence

  • Manufacturer warranty confirmed from the warranty card
  • Insured worldwide delivery
  • Payment by bank transfer or cryptocurrency
  • Registered Australian dealerHYPA International Pty Ltd · Victorian Second-Hand Dealer Licence SHD-0018017.
  • Direct specialist supportSpeak with the HYPA team before, during and after the purchase.

Enquire about this watch

RM 67-02 White Case · Ref. RM 67-02

Price on enquiry

Preferred contact — optional